Loona Calculators
Loona Calculators › Money & Finance › Electricity Bill

💡 Electricity Bill

Estimate your monthly electricity bill before it arrives. Enter the units you used — every slab rate can be edited, so you can type in the latest rates of your own company (LESCO, IESCO, K-Electric and others) for the closest estimate.

How to use the Electricity Bill

  1. Enter the units used this month (the difference between meter readings).
  2. Check the slab rates — common recent rates are pre-filled and can be replaced with the rates printed on your own bill.
  3. Optionally add GST and other charges (such as FPA), then press Calculate.
Example: For 300 units with the pre-filled rates, the energy cost is Rs 8,697 and, with GST (18%) added, the bill comes to about Rs 10,262 (the actual bill depends on your company's latest rates).

Frequently Asked Questions

Why is my real bill different?

Rates change with government notifications, fuel price adjustments (FPA) and your consumer category (protected/unprotected). Enter the rates printed on your own bill for the closest estimate.

What is a slab?

Electricity is charged in blocks: the first 100 units at one rate, the next 100 at a higher rate, and so on. This calculator applies each slab correctly.

Does it include FPA and fixed charges?

Add them in the Other charges field — they appear on your bill and vary every month.

Related Calculators

🏦

EMI & Loan Calculator

Money & Finance

📈

Compound Interest

Money & Finance

💼

Salary Tax Calculator

Money & Finance

📅

Age Calculator

Date & Time

🏷️

Discount Calculator

Money & Finance

💰

Simple Interest

Money & Finance

How it works — the formula

Domestic electricity in Pakistan is charged on a progressive slab system: your units are split into blocks, and each block is charged at its own rate — the first 100 units at the cheapest rate, the next 100 at a higher rate, and so on. The calculator walks your units through the six slabs in order, adds GST on the energy cost, and then adds any other charges you enter.

Formula: Energy cost = (first 100 units × rate 1) + (next 100 × rate 2) + (next 100 × rate 3) + (next 100 × rate 4) + (next 300 × rate 5) + (units above 700 × rate 6) · Total bill = energy cost + GST + other charges

Worked example

For 350 units at this page's default slab rates: 100 × Rs 23.51 = Rs 2,351, plus 100 × Rs 30.07 = Rs 3,007, plus 100 × Rs 33.39 = Rs 3,339, plus 50 × Rs 36.50 = Rs 1,825 — an energy cost of Rs 10,522. Adding GST at 18% (Rs 1,893.96) and Rs 500 of other charges gives an estimated bill of Rs 12,915.96, an average of Rs 36.90 per unit.

Frequently asked questions

Are all my units charged at the highest slab rate I reach?

No — the slabs are progressive. Only the units inside a slab pay that slab's rate; in the example above, the first 100 units are still charged at Rs 23.51 even though the household reached the fourth slab.

How is the average rate per unit worked out?

It is the total bill divided by the units consumed — Rs 12,915.96 ÷ 350 units = Rs 36.90 per unit in the worked example. It is a useful single number for comparing one month with another.

What happens if I use more than 700 units?

Every unit above 700 is charged at the last slab's rate (Rs 41.20 at the defaults). That slab has no upper limit in this calculator, so any consumption can be estimated.

The default rates are not my company's rates. What should I do?

Type over them. Every slab rate, the GST percentage and the other-charges field can be edited — copy the slab rates printed on your own latest bill (LESCO, IESCO, K-Electric or another company) for the closest estimate.

Can I estimate my bill before the meter is read?

Yes. Subtract your meter's previous reading from the current one to get the units consumed, and enter that figure — the estimate updates with the same slab maths the bill itself uses.

Embed this calculator on your website — free

Add this calculator to your own website or blog — it is completely free, needs no sign-up, and always shows the latest version. Copy the code below and paste it into your page where you want the calculator to appear. Keeping the small “Powered by Loona Automation” credit line under the embed helps keep this tool free — but you are free to style or remove it; the tool works either way.