Got a goal time? Turn it into a race plan. Pick your distance and target finish time to get an exact split chart — every kilometre or mile, even splits or negative splits — plus a printable race-day wristband, and Riegel predictions for the other classic distances from a recent result.
A negative split means running the second half of the race faster than the first. Most marathon world records were set this way: a controlled first half, then a stronger finish. Choose “Negative splits” above, pick how much faster the second half should be, and the planner works out both half paces so the total still equals your goal time exactly.
The Riegel formula, T2 = T1 × (D2/D1)^1.06, is the standard endurance prediction model, fitted to world-record performances across distances. It works best between neighbouring distances — predicting a 10K from a 5K, say — and assumes you train for the longer distance. A marathon predicted from a 5K is a target to build towards, not a guarantee.
Even splits — the same pace all the way — are the simplest to execute and suit most runners, especially in shorter races. Negative splits suit experienced runners in half marathons and marathons, where starting a little slower protects your energy for the final kilometres. When in doubt, plan even splits and finish strong if you feel good.
An even-split plan gives every kilometre (or mile) exactly the same share of your goal time: the split for each unit is goal seconds ÷ total distance, and the clock time at any point is that pace multiplied by the distance covered. The final segment is shorter whenever the distance is not a whole number of units — a marathon is 42.195 km, so the last split covers just 0.195 km — and this planner calculates that partial segment exactly, which is where simple split charts often go wrong.
A negative-split plan runs the second half faster by the percentage you choose. If the second half is p% faster, the first-half pace is goal time ÷ (distance × (1 − p/200)) and the second-half pace is that pace × (1 − p/100). A split that crosses the halfway point blends the two paces, and the two halves always add up to exactly your goal time.
The predictor uses the Riegel formula, the standard model of endurance performance: a 50:00 10K predicts a marathon of 50:00 × (42.195/10)^1.06 ≈ 3:50:01, a half marathon of about 1:50:19 and a 5K of about 23:59.
Formula: Even pace = goal time ÷ distance · Negative split: first-half pace = goal time ÷ (distance × (1 − p/200)); second-half pace = first-half pace × (1 − p/100) · Riegel prediction: T2 = T1 × (D2/D1)^1.06.
Inputs: Race distance: Marathon (42.195 km); goal time 3 hours, 30 minutes, 0 seconds; even splits, per kilometre.
Steps: Total time = 3 × 3600 + 30 × 60 = 12,600 seconds. Even pace = 12,600 ÷ 42.195 = 298.61 seconds per kilometre, displayed as 4:58.6 per km. Clock times multiply that pace by the distance: 5K in 24:53.1, 10K in 49:46.1, 40K in 3:19:04.5. The last split covers only 42.195 − 42 = 0.195 km, so it takes 0.195 × 298.61 ≈ 58.2 seconds.
Result: Even pace 4:58.6 per km (8:00.6 per mile), halfway reached in exactly 1:45:00.0, finish in exactly 3:30:00.0 — with the final 0.195 km taking just 58.2 seconds.
Every 5 kilometres (or every 5 miles) plus the finish — close enough to correct your pace early, far enough apart to read at a glance while running. The wristband above shows exactly those marks with your planned clock times; print it, or screenshot it to your phone. For races of 10 units or less it shows every single split.
Because the race distance is not a whole number of units. A marathon is 42 full kilometres plus 0.195 km, so the final split is a partial segment and its time is proportionally smaller — 58.2 seconds at 4:58.6 per km pace. Charts that charge a full unit's time for that last piece overstate the finish time.
Yes. Choose “Custom distance”, type the distance and pick kilometres or miles. The split chart, wristband and pacing strategy all work for any distance — trail races, ultras and odd-distance events included.
Start with 1–2%. A 2% negative split in a 3:30 marathon means reaching halfway about a minute slower than even pace (1:46:04 instead of 1:45:00) and making it up with interest in the second half. Five percent is aggressive and suits experienced racers on a good day.
Free running pace calculator: pick 5K, 10K, half marathon, marathon or a custom distance with y…
Health
Health
Health
Date & Time
Converters
Fun
Converters
Add this calculator to your own website or blog — it is completely free, needs no sign-up, and always shows the latest version. Copy the code below and paste it into your page where you want the calculator to appear. Keeping the small “Powered by Loona Automation” credit line under the embed helps keep this tool free — but you are free to style or remove it; the tool works either way.