Sheet goods for a floor, roof, wall or formwork job: enter the area and your sheet size, and get the sheet count two ways — by pure area and by a real row-by-row layout — with the higher, safer number as the recommendation.
2440 × 1220 mm (a true 8 × 4 ft) is the world standard; some markets also stock 3050 × 1525 mm (10 × 5 ft) and smaller project panels. Note that in North America a '4×8' sheet is exactly that, while metric-market sheets sold as 2440×1220 are the same physical size.
Area maths assumes off-cuts can be reused perfectly. In reality each row starts with a fresh sheet unless the off-cut from the previous row happens to fit. The layout count shows the row-by-row truth; staggering joints (recommended for strength) usually lands between the two figures.
For floors and roofs, yes — stagger end joints by at least 400 mm between rows so no continuous weak line crosses the structure, and leave a 2–3 mm expansion gap between sheet edges (10 mm at walls) for timber-based panels.
Sheets by area = ceil( Area × (1 + Waste %) ÷ Sheet area )
Sheets by layout = ceil(Length ÷ Sheet length) × ceil(Width ÷ Sheet width)
Recommended = the larger of the two
The area method alone underestimates whenever a dimension falls just past a whole number of sheets — a 2.5 m width needs three rows of 1.22 m sheets, not two and a bit.
Common choices: 9–12 mm for wall sheathing and furniture backs, 18 mm for flooring and roofing over joists/rafters at 400–600 mm centres, 21–24 mm for heavy-duty floors and formwork. Span tables in your local code govern structural use.
10% for simple rectangles, 15% for roofs with hips/valleys, walls with many openings, or diagonal laying. The layout count in this calculator already captures much of the cutting loss on plain rectangles.
Yes — the maths is identical for any sheet good sold in rectangles. Enter your sheet size (drywall is often 1200 × 2400 mm or 4 × 8/12 ft) and read the counts the same way. For drywall specifically, our Drywall Calculator adds tape and compound.
Add this calculator to your own website or blog — it is completely free, needs no sign-up, and always shows the latest version. Copy the code below and paste it into your page where you want the calculator to appear. Keeping the small “Powered by Loona Automation” credit line under the embed helps keep this tool free — but you are free to style or remove it; the tool works either way.