Planning a deck: enter the deck size, your board width and gap, and joist spacing, and get the boards to buy, the joists underneath and a realistic screw count — in metric or imperial.
About 5–6 mm (3/16–1/4 in) for timber boards: enough for drainage and swelling, small enough that heels and dropped screws do not disappear. Composite boards follow the manufacturer's clip system, usually 5–7 mm.
Boards usually run from the house outward or along the longest dimension — and always perpendicular to the joists. Running the fall (slope) along the boards, away from the house, helps water drain off the ends.
400 mm (16 in) centers is the standard for residential decks with 28 mm+ timber boards. Thinner boards (21–24 mm) and most composite boards need 300 mm (12 in); diagonal board layouts also need closer joists.
Boards across = ceil( Deck width ÷ (Board width + Gap) )
Board length total = Boards across × Deck length
Joists = ceil(Deck length ÷ Joist spacing) + 1
Screws = Boards across × Joists × 2
Boards are counted as full-length pieces running the length of the deck. If your deck is longer than the boards you can buy, joints must land on a joist — the waste allowance covers the extra cuts.
Two screws at every board-to-joist crossing adds up fast — a modest 12 m² deck can pass 500 screws. Buy a bulk box, and add 10% for dropped and cam-out casualties; the estimate here includes the waste allowance only in the board count.
No. Even kiln-dried timber expands across its width when it gets wet, and a gapless deck will cup, lift fixings and hold standing water. The gap is a drainage feature, not sloppy work.
10% for a plain rectangle with boards running straight. Use 15–20% for diagonal patterns, picture-frame borders or decks with many cut-outs around posts and steps.
Add this calculator to your own website or blog — it is completely free, needs no sign-up, and always shows the latest version. Copy the code below and paste it into your page where you want the calculator to appear. Keeping the small “Powered by Loona Automation” credit line under the embed helps keep this tool free — but you are free to style or remove it; the tool works either way.