Loona Construction Calculators
Loona Construction Calculators › Construction › Pool Volume Calculator

🏊 Pool Volume Calculator

How much water is in your pool? Pick the shape — rectangle, round or oval — enter the size and the shallow and deep end depths, and get the volume in liters and US gallons: the number you need for chemical dosing, heating and filling time.

How to use the Pool Volume Calculator

  1. Choose metric or imperial units.
  2. Pick the pool shape: rectangle, round or oval.
  3. Enter the length and width (for a round pool the width is the diameter).
  4. Enter the shallow-end and deep-end water depths — the calculator averages them, which suits a straight sloped floor.
  5. Press Calculate for liters and US gallons.
Example: An 8 m × 4 m pool with a flat 1.5 m depth holds 48 m³ — 48,000 liters, about 12,680 US gallons.

Frequently Asked Questions

How do I measure my pool if it has a sloped floor?

Measure the water depth at the shallow end and at the deep end (to the waterline, not the top of the wall) and enter both — the calculator averages them. For a pool with a steep 'hopper' bottom, the true volume is a little less than the average suggests; dose chemicals conservatively and adjust by testing.

Why do I need the volume in liters or gallons?

Almost every pool chemical — chlorine, pH adjusters, algaecide, flocculant — is dosed per volume of water. Guessing the volume is the main reason pools end up over- or under-dosed; a measured volume makes test results and doses line up.

How long will it take to fill my pool?

Divide the volume by your hose or tap flow. A typical garden hose delivers 15–20 liters per minute: 48,000 liters ÷ 18 L/min ≈ 2,670 minutes — about 44 hours. Most people fill in stages over two days.

Related Calculators

🔲

Tile Calculator

Construction

🧱

Concrete Calculator

Construction

🌞

Deck Calculator

Construction

🏖️

Sand Calculator

Construction

🎨

Paint Calculator

Construction

How it works — the formula

Average depth = (Shallow depth + Deep depth) ÷ 2
Rectangle: Volume = Length × Width × Average depth
Round: Volume = π × (Diameter ÷ 2)² × Average depth
Oval: Volume = π × (Length ÷ 2) × (Width ÷ 2) × Average depth

One cubic meter is exactly 1,000 liters and about 264.2 US gallons. The average-depth method assumes the floor slopes evenly from shallow to deep end, which is true of most domestic pools.

Worked example

Rectangle pool 8 m × 4 m, depth a flat 1.5 m both ends: average depth = 1.5 m. Volume = 8 × 4 × 1.5 = 48 m³ = 48,000 liters = 48,000 ÷ 3.785 ≈ 12,680 US gallons.

Frequently asked questions

Does a kidney or freeform pool fit these shapes?

Approximately. Use the oval formula with the longest length and widest width, then reduce the result by about 10–15% for the curves that cut the corners. It is close enough for dosing, especially if you confirm with your first chemical test.

How much water does a round above-ground pool hold?

Enter the diameter as the width and the wall height minus about 15 cm (the water sits below the rim) as both depths. A 4.6 m (15 ft) pool filled to 1.1 m holds about 18,300 liters (4,830 US gallons).

Should I use US or imperial gallons?

US gallons (3.785 L) — used by virtually all pool product labels. An imperial gallon is 4.546 L; if an old British product doses per imperial gallon, convert your liters first (liters ÷ 4.546).

Embed this calculator on your website — free

Add this calculator to your own website or blog — it is completely free, needs no sign-up, and always shows the latest version. Copy the code below and paste it into your page where you want the calculator to appear. Keeping the small “Powered by Loona Automation” credit line under the embed helps keep this tool free — but you are free to style or remove it; the tool works either way.