Enter any two values — voltage, current, resistance or power — leave the other two blank, and this calculator works out the rest using Ohm's law and the power law. (No unit switch here: volts, amps, ohms and watts are the same in metric and imperial countries.)
It says the current through a conductor is proportional to the voltage across it and inversely proportional to its resistance: double the voltage and (for the same resistor) you double the current; double the resistance and the current halves. It is written V = I × R.
Any two of the four. Common pairs: voltage + current (to get resistance and power, e.g. for checking a load), voltage + power (to get the current a device will draw — the pair you need before choosing a fuse or cable), and current + resistance (to get the voltage dropped across a component).
With three or four values entered the problem is over-specified and the values may contradict each other. Exactly two knowns have exactly one consistent answer for the other two — that is the whole point of the Ohm's law wheel.
Ohm's law: V = I × R · I = V ÷ R · R = V ÷ I
Power law: P = V × I · P = I² × R · P = V² ÷ R
Square-root forms (from R and P): V = √(P × R) · I = √(P ÷ R)
Picture the Ohm's law wheel: four quantities — V at the top, then I, R and P — arranged in a circle of twelve formulas. Cover the quantity you want with a finger and the two visible neighbors tell you the formula: cover V and you see I × R; cover I and you see V ÷ R (and P ÷ V); cover R and you see V ÷ I (and P ÷ I²); cover P and you see V × I, I² × R or V² ÷ R. Whichever pair you start with, the wheel closes: the two unknowns fall out of the two you know, which is exactly what this calculator does for all four quadrants.
For purely resistive AC loads (heaters, incandescent lamps) yes, using RMS voltage and current. For motors, transformers and other inductive or capacitive loads, impedance replaces simple resistance and real power also involves the power factor, so treat results for those loads as a first approximation.
Enter its rated power and the supply voltage. Example: a 2,300 W kettle on 230 V draws I = P ÷ V = 2,300 ÷ 230 = 10 A — which is why it needs a circuit and plug rated above 10 A.
Convert first: 1 kΩ = 1,000 Ω and 1 mA = 0.001 A. Entering 500 mA as 0.5 and 2 kΩ as 2000 keeps the math right; the results come back in volts, amps, ohms and watts.
Add this calculator to your own website or blog — it is completely free, needs no sign-up, and always shows the latest version. Copy the code below and paste it into your page where you want the calculator to appear. Keeping the small “Powered by Loona Automation” credit line under the embed helps keep this tool free — but you are free to style or remove it; the tool works either way.