Loona Construction Calculators
Loona Construction Calculators › Construction › Deck Calculator

🌞 Decking Calculator

Planning a deck: enter the deck size, your board width and gap, and joist spacing, and get the boards to buy, the joists underneath and a realistic screw count — in metric or imperial.

How to use the Deck Calculator

  1. Choose metric or imperial units.
  2. Enter the deck length (the way the boards run) and the width across them.
  3. Enter your board width and the gap between boards (5 mm / 3/16 in drains well).
  4. Enter the board length you will buy and your joist spacing (400 mm / 16 in is standard).
  5. Press Calculate for boards, joists and screws.
Example: A 4 m × 3 m deck with 140 mm boards and a 5 mm gap needs 21 boards across, 84 m of board in total, 11 joists at 400 mm spacing and about 462 screws.

Frequently Asked Questions

What gap should I leave between deck boards?

About 5–6 mm (3/16–1/4 in) for timber boards: enough for drainage and swelling, small enough that heels and dropped screws do not disappear. Composite boards follow the manufacturer's clip system, usually 5–7 mm.

Which way should deck boards run?

Boards usually run from the house outward or along the longest dimension — and always perpendicular to the joists. Running the fall (slope) along the boards, away from the house, helps water drain off the ends.

How far apart should deck joists be?

400 mm (16 in) centres is the standard for residential decks with 28 mm+ timber boards. Thinner boards (21–24 mm) and most composite boards need 300 mm (12 in); diagonal board layouts also need closer joists.

Related Calculators

🪵

Plywood Calculator

Construction

🪵

Board Foot Calculator

Construction

🪜

Stairs Calculator

Construction

🚧

Fence Calculator

Construction

🪵

Flooring Calculator

Construction

🪵

Materials for a 12 × 16 ft Deck

Construction

How it works — the formula

Boards across = ceil( Deck width ÷ (Board width + Gap) )
Board length total = Boards across × Deck length
Joists = ceil(Deck length ÷ Joist spacing) + 1
Screws = Boards across × Joists × 2

Boards are counted as full-length pieces running the length of the deck. If your deck is longer than the boards you can buy, joints must land on a joist — the waste allowance covers the extra cuts.

Worked example

Deck 4 m × 3 m; pitch = 140 + 5 = 145 mm. Boards across = 3 ÷ 0.145 = 20.7 → 21 boards; total length = 21 × 4 = 84 m (24 boards of 3.6 m before waste). Joists = ceil(4 ÷ 0.4) + 1 = 11. Screws = 21 × 11 × 2 = 462.

Frequently asked questions

How many screws does a deck really use?

Two screws at every board-to-joist crossing adds up fast — a modest 12 m² deck can pass 500 screws. Buy a bulk box, and add 10% for dropped and cam-out casualties; the estimate here includes the waste allowance only in the board count.

Can I lay boards without gaps if they are dry?

No. Even kiln-dried timber expands across its width when it gets wet, and a gapless deck will cup, lift fixings and hold standing water. The gap is a drainage feature, not sloppy work.

What waste percentage should I use for decking?

10% for a plain rectangle with boards running straight. Use 15–20% for diagonal patterns, picture-frame borders or decks with many cut-outs around posts and steps.

Embed this calculator on your website — free

Add this calculator to your own website or blog — it is completely free, needs no sign-up, and always shows the latest version. Copy the code below and paste it into your page where you want the calculator to appear. Keeping the small “Powered by Loona Automation” credit line under the embed helps keep this tool free — but you are free to style or remove it; the tool works either way.