How much water is in your pool? Pick the shape — rectangle, round or oval — enter the size and the shallow and deep end depths, and get the volume in litres and US gallons: the number you need for chemical dosing, heating and filling time.
Measure the water depth at the shallow end and at the deep end (to the waterline, not the top of the wall) and enter both — the calculator averages them. For a pool with a steep 'hopper' bottom, the true volume is a little less than the average suggests; dose chemicals conservatively and adjust by testing.
Almost every pool chemical — chlorine, pH adjusters, algaecide, flocculant — is dosed per volume of water. Guessing the volume is the main reason pools end up over- or under-dosed; a measured volume makes test results and doses line up.
Divide the volume by your hose or tap flow. A typical garden hose delivers 15–20 litres per minute: 48,000 litres ÷ 18 L/min ≈ 2,670 minutes — about 44 hours. Most people fill in stages over two days.
Average depth = (Shallow depth + Deep depth) ÷ 2
Rectangle: Volume = Length × Width × Average depth
Round: Volume = π × (Diameter ÷ 2)² × Average depth
Oval: Volume = π × (Length ÷ 2) × (Width ÷ 2) × Average depth
One cubic metre is exactly 1,000 litres and about 264.2 US gallons. The average-depth method assumes the floor slopes evenly from shallow to deep end, which is true of most domestic pools.
Approximately. Use the oval formula with the longest length and widest width, then reduce the result by about 10–15% for the curves that cut the corners. It is close enough for dosing, especially if you confirm with your first chemical test.
Enter the diameter as the width and the wall height minus about 15 cm (the water sits below the rim) as both depths. A 4.6 m (15 ft) pool filled to 1.1 m holds about 18,300 litres (4,830 US gallons).
US gallons (3.785 L) — used by virtually all pool product labels. An imperial gallon is 4.546 L; if an old British product doses per imperial gallon, convert your litres first (litres ÷ 4.546).
Add this calculator to your own website or blog — it is completely free, needs no sign-up, and always shows the latest version. Copy the code below and paste it into your page where you want the calculator to appear. Keeping the small “Powered by Loona Automation” credit line under the embed helps keep this tool free — but you are free to style or remove it; the tool works either way.